Gas Heater Service Sydney your Heat & Glo Gas Heater Service Specialists.
Our reliable tradespeople will carry out a Heat & Glo gas heater service for you which includes:
First of all, checking gas pressures and all fans are operating correctly. So having your Heat & Glo gas heater inspected and cleaned periodically by us who are your authorised Heat & Glo gas heater service technicians will benefit performance, help ensure safe operation, minimize any potential down time and extend the life of your appliance. Hence, it is important that your gas heaters are only service by qualified technicians. Therefore, in most cases, this means a licensed gas fitter or a factory technician.
Furthermore, we offer a complete end to end service from repairs and maintenance of your Heat & Glo Gas Heaters to helping you choose the right Heat & Glo gas heating system for your home.
Gas Heater Service Sydney offers a fast and reliable Heat & Glo gas heater service, will always be on time and consider no job too small. Also, we endeavour to provide exceptional customer service and always leave a job neat and tidy.
Heat & Glo Key Tecnologies
Certainly, never attempt to fix a gas appliance or attempt a Heat & Glo gas heater service yourself or allow an unqualified person to attempt to fix it for you.
Since, Gas Heater Service Sydney are licenced and qualified gas plumbers, specialising in Heat & Glo Gas Heater Service, Repairs, Installation and Maintenance.
In addition, manufacturers typically recommend that their gas heaters be serviced every one or two years.
Also, the specialized technologies utilized in our hearth products are part of the reason why Heat & Glo is an unrivaled industry leader. So to learn more about each technology, and additional information regarding certain industry terms, choose the category below.
IntelliFire Touch is the most advanced and intuitive IntelliFire system, making operating your fireplace simple, smart and safe. So select the wireless wall switch or touchscreen remote control for the solution that fits your life.
With Direct Vent Technology, your fireplace can use outside air for combustion, expelling 100% of the combustion exhaust and by-products.
Direct vent FireBrick gas fireplaces and inserts provide the warmth and glow of a real wood burning fire without any of the inconvenience.
IntelliFire features intermittent-pilot Ignition (IPI) allowing you to conserve fuel and money when the fireplace is not in use.
PowerFlow redirects the flow of heat, sending the warmth where you want it.
Power venting technology makes it possible to install a gas fireplace virtually anywhere.
So this climate control technology provides homeowners with the option to redirect heat output to specific areas of the home, improving heating efficiency.
Heat management technology can redirect up to 50% of the heat to another area, also reducing wall temperatures above the fireplace.
In addition, it is very important that you understand the correct and safe operation of your Heat & Glo gas heaters. So if you don’t have the owner’s manual, most gas appliance manufacturers have them available for downloading on their web sites.
Furthermore, key warning signs that your Heat & Glo gas heater requires servicing are a yellow or red flame, a flame with a yellow burning tip, the accumulation of yellow/brown soot around the appliance, pilot lights that frequently blow out or an acrid smell and eye irritation.
In addition, the exceptions to this are gas fireplaces and gas log fires that are designed to have yellow flames. So the result is that you could be wasting gas and/or generating carbon monoxide. Hence depending on the make and model of gas heater, you may be able to clean the air filter yourself. Since gas regulators have a limited life span. Lastly, incorrect gas pressure can affect the amount of oxygen drawn into the burner with the gas.
If you smell gas take the following gas safety precautions:
First of all, turn off the gas at the source. So at the meter for natural gas or at the cylinders for LPG gas users, but only if safe to do so. Therefore, avoid contact with any visible gas cylinder leak, as the gas stream can cause cold burns. So keep people away from the affected area until the gas dissipates. Also, properly functioning gas appliances are quite safe.
So if you experience any signs of carbon monoxide poisoning while operating your Heat & Glo gas heaters, you should stop using it until it is serviced by our gas fitters.
Therefore, you need to schedule regular servicing for your Heat & Glo gas heaters. So if you notice anything damaged or abnormal in the operation, look or smell of the appliance, it is best to call us right away. Gas Heater Service Sydney offers emergency call out 24/7 on all your gas heater needs. Contact us immediately. You may also visit our official Facebook page.